Back to Top
Fire Brick Liners
Fire Bricks are used to line the inside of the stove fire box. They help to insulate the internal sides, rear and top of the stove from the heat and reflect heat back towards the front of the stove, maximising heat output to the room. Most modern Fire Brick are manufactured from 25mm and 30mm Vermiculite Fire Board.
We can manufacture all sizes and profiles of Vermiculite Stove Fire Bricks onsite as well as, Baffle Throat Plates. We also provide larger sheets [900mm x 600mm] if required.
Alternatively, brands including ACR Stoves, Aga Stoves, Henley Stoves and Stanley Stoves use fireclay brick liners on some of their stove models. Lastly, Henley and Mazona use metal fire brick.
Tip: Replace all of the brick at the same time as this will allow for a best fit all around and prevent excess heat flow into the stove body.
Fire Brick
-
Jetmaster 16i Inset Lower Baffle Brick - KJMIN16034
£7.00 £5.83Lower baffle brick for Jetmaster
- 16i Inset (Post 2016 model)
This part is sent in two pieces but only 1 is required to order
For pre 2016 model lower baffle brick, see part number K107174
Learn More -
Jetmaster 16i Inset Rear Fire Brick - KJMIN16032£17.00 £14.17Rear brick for Jetmaster inset models below
- 16i Inset
This part replaces part number K107173
Learn More -
Jetmaster 16i Inset Side Fire Brick - KJMIN16033£17.00 £14.17Side brick for Jetmaster inset models below
- 16i Inset
- 18i Inset
This part is sold individually, 1 brick is required for each side of the stove
This part replaces part number K107146
Learn More -
-
-
-
Jetmaster 50i Inset Side Fire Brick - KJMIN50017£18.00 £15.00Side brick for Jetmaster
- 50i Inset
- 60i Inset
- 70i Inset
This part replaces part number K107156
Learn More -
Jetmaster 60i and 60i Low Inset Lower Baffle Brick - KJMIN60L016£28.00 £23.33Lower baffle brick for post 2016 Jetmaster model
- 60i Low Inset
This brick is sent in two pieces
Learn More
