Blacksmith Spare Parts

A set of 2 fire bricks LH and RH made from high density vermiculite insulation for the popular Blacksmith Anvil Stove. Remove the fire fence and top baffle to replace any existing bricks that need replaced.

Fire bricks only need replacing if damage to them begins to expose the stove's bodywork to flames. In severe cases of prolonged exposure this could permanently damage the stove by cracking a cast iron side panel or warping the steel bodywork.

A High Grade Cast Iron Replacement Baffle/Throat Plate to fit the Blacksmith Bellows Non-Boiler

Remove the fire fence and lift up the baffle plate to remove.

Baffle plates should be checked every couple of months of use to ensure that there is no build up of soot sitting above it.

A High Grade Cast Iron Replacement Baffle/Throat Plate to fit the Blacksmith Bellows Stove Spares

Remove the fire fence and lift up the baffle plate to remove.

Baffle plates should be checked every couple of months of use to ensure that there is no build up of soot sitting above it.

A set of side fire bricks made from high density vermiculite insulation bricks for the Blacksmith Bellows stove. Remove the fire fence and top baffle to replace any existing bricks that need replaced.

Fire bricks only need replacing if damage to them begins to expose the stove's bodywork to flames. In severe cases of prolonged exposure this could permanently damage the stove by cracking a cast iron side panel or warping the steel bodywork.

This set includes the 2 side bricks.

A 180mm diameter inner grate with a protruding riddle arm made from high grade cast iron for the popular Blacksmith Bellows Stove. Remove the fire fence and Lift out the existing inner grate or circular grate and disconnect the riddle arm under the carrier frame.

Please note this part fits both the new and the older version of the Bellows Stove.

This is a high grade cast iron Carrier Frame or Outer Grate Frame to suit the Blacksmith Bellows Stove. The Stove needs to be cleaned and all inner parts carefully removed to replace this part.

Please note this part fits both the new and the older version of the Bellows Stove.

A High Grade Cast Iron Replacement Baffle/Throat Plate to fit theBlacksmith Forge Stove. This is the lower baffle on the Forge which sits between the carrier frame and the boiler at the lower rear of the stove.

Remove the fire fence and lift up and tilt out the baffle plate to remove.

Baffle plates should be checked every couple of months of use to ensure that there is no build up of soot sitting above it. Damaged or warped baffles will give a reduced efficiency and heat from the stove.